Skip To The Main Content
UPCOMING EVENT
OLearys Equipment

O'Leary's
Contractors Equipment

  • Rentals
  • Sales
  • Service
  • Parts
(773) 252-6600 Location

Contractors Equipment

  • Rentals
  • Sales
  • Service
  • Parts
(773) 252-6600 Location
UPCOMING EVENT

Details

E-Z Drill 210-3 SRA Slab Rider

Available For Rent
Available For Purchase


Drill up to three holes at once with the 210-3 SRA slab rider. It features individually adjustable drill systems for drilling holes every 12 to 36 inches on center, and you can operate within a 4-foot patch and drill into slabs as thick as 24 inches. The 210-3 SRA requires 300 cfm and is self-propelled for hassle-free maneuverability. To easily tow the air compressor, equip it with the optional tow bar package.

Product files and documents

 
210-3 SRA Specs PDF file, 1.06 MB
210-3, -4, -5 SRA Manual PDF file, 314.84 KB


Horizontal Position

Lower Length (A) 47 in (119.4 cm)
Overall Length (A) + (C) 117 in (297.2 cm)
Cart Length (C) 70 in (177.8 cm)
Wheel Base (D) 58 in (147.3 cm)
Width 60 in (152.4 cm)
Height 44 in (111.8 cm)
Weight 2000 lbs (908 kg)
Drill Distance From Corner 6 in (15.2 cm)
Drill Distance From Ground 3 in (7.6 cm)
Drill Depth (std.) 18 in (45.7 cm)
Drill Bit Diameter 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Distance From Wheel to Center of Bit N/A
Drill Motor (pneumatic) CP 32A
Drill Motor Weight 54 lbs (24.5 kg)
Chuck Size (std.) 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum) 300 cfm (8.4 m3/min)
Operating Pressure 90 psi (6.2 bar)
Impact (ft. lbs./blow) 36 fpb (49 J)
Hammer Speed 2200 bpm
Speed 288 rpm

 

Vertical Position

Lower Length (A) N/A
Overall Length (A) + (C) 91 in (231.1 cm)
Cart Length (C) 70 in (177.8 cm)
Wheel Base (D) 58 in (147.3 cm)
Width 60 in (152.4 cm)
Height Varies
Weight 2000 lbs (908 kg)
Drill Distance From Corner N/A
Drill Distance From Ground up to 12 in (30.5 cm)
Drill Depth (std.) 18 in (45.7 cm)
Drill Bit Diameter 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Distance From Wheel to Center of Bit 23 1/2 in (59.7 cm)
Drill Motor (pneumatic) CP 32A
Drill Motor Weight 54 lbs (24.5 kg)
Chuck Size (std.) 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum) 300 cfm (8.4 m3/min)
Operating Pressure 90 psi (6.2 bar)
Impact (ft. lbs./blow) 36 fpb (49 J)
Hammer Speed 2200 bpm
Speed 288 rpm