Attach the 210-4 EQ MT to nearly any backhoe or excavator for drilling four holes at once. You can drill to depths of 18 inches and adjust the height of the gangs for accurate drilling in areas with extreme asphalt overlay. The unit’s “floating” bucket curl pin helps level the drill, which saves you time by eliminating the need for manual leveling or positioning.

Horizontal Position

Lower Length (A)	47 in (119.4 cm)
Overall Length (A) + (B)	91 in (231.1 cm)
Frame Length (B)	44 in (111.8 cm)
Width	47 in (119.4 cm)
Height	35 in (88.9 cm)
Weight	1700 lbs (771.8 kg)
Drill Distance From Corner	6 in (15.2 cm)
Drill Distance From Ground	3 in (7.6 cm)
Drill Depth (std.)	18 in (45.7 cm)
Drill Bit Diameter	5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Drill Motor (pneumatic)	CP 32A
Drill Motor Weight	54 lbs (24.5 kg)
Chuck Size (std.)	7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)	400 cfm (11.2 m3/min)
Operating Pressure	90 psi (6.2 bar)
Impact (ft. lbs./blow)	36 fpb (49 J)
Hammer Speed	2200 bpm
Speed	288 rpm